Evolv Vapor

Ekowool Silica

  Home > Tanks >

  Fogger V3 Rebuildable Atomizer
V3 Fogger Rebuildable Atomizer

Our Price: $40.00
Sale Price: $34.99
Savings: $5.01

Stock Status: (Out of Stock)
Availability:: Usually Ships in 24 to 48 Hours
Product Code: F-V3-RAS


The Fogger V3 Rebuildable Atomizer

The Fogger V3 is a totally New and Upgraded unit. Nearly all aspects of the V2 have been upgraded to bring you the V3 Fogger. You cannot order the Stainless Steel Sleeve (with windows) and put it on a Version 2, it will not fit.

The New Fogger V3 features all the upgrades you have asked for! Most notably the Posts have been redesigned, improved and taller posts to make changing the coil easier. A great feature that we really like is the New Top Cap, the New Top Cap screws into place, whereas the V2 used o-rings to keep it in place.

The manufacturer went back to a complete Stainless Steel design with the V3 Fogger; all parts are 100% Stainless Steel. This is the Fogger that you have been waiting for! Check out the New Fogger V3 and you will be back for a second!

You Receive:

  • 1 x Fogger V3 Rebuildable Atomizer w/Pyrex Tank and Stainless Steel Sleeve
  • 1 x Stainless Steel Drip Tip
  • 1 x Screwdriver
  • 2 x Extra Black O-Rings
  • 2 x Extra Silicone O-Rings
  • 3 x Extra Silicone O-Rings
  • 1 x Pre-rolled stainless steel mesh with wick
  • 3 x Extra Heat-Wire

How to Disassemble the Fogger V3:

  • First, remove the upper sleeve (the upper sleeve has Fogger engraved). Hold the base of the atomizer and unscrew the upper sleeve.
  • Once the upper sleeve has been removed, slide off the stainless steel tank sleeve (tank protector with windows). This piece slides off.
  • Now you are ready to remove the Top Cap (the top cap is the stainless steel piece with the fill hole). When removing the top cap you want to hold the base and glass tank together; this will enable you to put the majority of the pressure on the base. You want to hold the glass tank gently and unscrew the Top Cap.
  • It is time to remove the glass tank, simply pull the glass tank straight up, be careful not to lose the black o-ring that sits on the base, the o-ring most likely will come off with the glass tank.
  • Now you have access to the interior of the atomizer. To access the coil, simply unscrew the lid to the coil department; do not unscrew by holding the stainless steel air-flow tube.
  • You are now able to remove the coil and make a coil to your preference.

Share your knowledge of this product. Be the first to write a review »